news information
Project Implementation Log: In-Lab Retrospective of IPX9K Rain Test Chamber Measurements
2026-09-07
The partner is a domestic automotive parts manufacturer that primarily produces vehicle sensor assemblies. After installation in vehicles, these components are subjected to high-pressure, high-temperature washdown as well as the risk of ingress from roadborne sand and dust. Internally, waterproofing and dustproofing tests are conducted separately, without using integrated equipment. In accordance with GB/T 4208‑2017 and ISO 20653 standards, an IPX9K rain test chamber is employed for verifying resistance to high-temperature, high-pressure water jets, while separate sand and dust testing is performed using dedicated equipment, allowing the two types of reliability tests to be carried out independently.
Before partnering with Guangzhou Yuexin, the company had to outsource all IPX9K testing for its samples to external laboratories. During new‑product development cycles, frequent structural changes led to long lead times for outsourced testing, and the back-and-forth movement of samples significantly slowed R&D validation. Having previously evaluated similar equipment from other manufacturers, the company found that during operation, IPX9K rain‑test chambers exhibited fluctuations in water pressure and temperature, making it difficult to consistently reproduce multi‑angle spray conditions; moreover, data dispersion in parallel sample tests was unacceptably high, complicating assessments of sealing performance. Dust‑proof testing required separate equipment, and the existing integrated solution struggled to accommodate both test requirements simultaneously.
Following multiple rounds of technical discussions and parameter comparisons, the customer purchased an IPX9K rain test chamber from Guangzhou Yuexin and separately acquired standalone sand and dust testing equipment. Upon delivery, Yuexin engineers performed on-site installation, calibration, and commissioning, and provided hands-on training to laboratory operators, covering parameter settings, routine checks, nozzle maintenance, and basic troubleshooting for the IPX9K rain test chamber. This enabled internal staff to independently carry out the entire test procedure, and the equipment was officially put into regular use in the laboratory.
Customer lab engineer feedback, configuration IPX9K Rain Test Chamber Subsequently, most R&D preliminary tests no longer need to be outsourced to third parties, effectively reducing sample submission and testing turnaround times. During routine testing, the IPX9K rain test chamber maintains stable water pressure and temperature control, and its multi‑angle spray conditions fully comply with standard requirements. Test records are thoroughly archived, and data deviations from repeated measurements remain within acceptable limits, providing valuable reference for optimizing the sealing of enclosure joints and wiring harness connectors. Dustproof testing is conducted independently on dedicated equipment, ensuring no interference between operations. When questions arise regarding parameter adjustments or interpretation of standards, Yuexin Guangzhou’s technical staff respond promptly and offer guidance tailored to on‑site practices. Overall, the IPX9K rain test chamber exhibits a low failure rate, requires manageable routine maintenance, and is well suited for new product validation, incoming material inspections, and type‑approval testing.
Configuring separate waterproof and dustproof systems better aligns with the testing plan of this component manufacturer. IPX9K Rain Test Chamber It can reliably perform high-temperature, high-pressure jet-waterproof testing, while a dedicated sand-and-dust chamber handles dust‑proof verification. The complete solution effectively supports component R&D iterations and factory‑level quality control.
Real customer reviews
We manufacture automotive sensor assemblies and operate two separate sets of equipment—one for waterproofing and one for dustproofing—rather than using an integrated machine. During new product development, the IPX9K rain‑test chamber is our core device for verifying high‑temperature, high‑pressure washdown performance; each time the sealing structure is revised, we must conduct repeated tests to validate it.
Before partnering with Guangzhou Yuexin, IPX9K‑related testing could only be outsourced, resulting in long lead times. After procuring Yuexin’s IPX9K rain‑test chamber and integrating it with a standalone sand‑and‑dust unit, the laboratory can now independently perform protective‑performance verification. Since commissioning, the equipment has operated stably; the rain‑test chamber demonstrates excellent reproducibility of water pressure, water temperature, and multi‑angle spray conditions. The dust‑proof tests are conducted using the separate unit, and the collected data can be used directly for internal assessments.
When encountering operational or debugging issues, Yue Xin’s technical support responds promptly, equipment failures are rare, and the system effectively meets our practical testing needs for R&D validation and sample inspections. Automotive Components Company, Engineer Chen | 2026-04-08
More Information
National Consulting Hotline:
E-Mail:yxipx@yxipx.com
Guangzhou Headquarter Address: 101, No.3, General Son, Pangxi Village, Dalong Street Office, Panyu District, Guangzhou
East China Office Address: No. 141, Lane 900, Lu Xiang District, Xinfeng North Road, Huaxin Town, Qingpu District, Shanghai
WeChat Public
WeChat Service
© 2023 Guangzhou Yuexin Testing Equipment Co., Ltd All rights reserved. SEO Website: WWW.300.CN business license
Tel：400-997-0881
No.3 Jiangjunzi, Jiangxi Village, Dalong Street Office, Shiqi Town, Panyu District, Guangzhou City
E-mail：yxipx@yxipx.com
We will provide you with timely feedback